Tabla de contenido
Publicidad
Mechanical installation
Installation of the second hub onto the shaft
4
4.2
Fig. 7
Mounting of the second hub
4
5
7. Insert second key (4.1) into the shaft (5) if required.
8. Press second hub (4) onto the shaft (5).
9. Secure hub (4) against axial displacement, e.g. by using a circlip (4.2).
INTORQ | BA 14.0196 | 04/2016
NOTICE
Only in the case of rotors with mounting paste on their gear teeth:
❚ Remove cover films from both front ends of the rotor.
❚ Protect friction surfaces against contact with mounting paste!
❚ After the mounting, excessive mounting paste must be removed properly!
3
4.1
4.2
2.
1.
3.
4.
Hub
Shaft
5
3
Complete rotor
4.1 Key
4.2 Circlip
25
Publicidad
Capítulos
Tabla de contenido
