Care And Maintenance; Customer Service - NOVIPRO COMPACT Instrucciones De Uso

LED's:
LED left (4)
lights up red
flashes red
4

Care and Maintenance

NOVIPro Compact:
Remove the battery prior to carrying out any work on the machine.
Check that the press jaws are fully functional. Damaged press jaws must not be used and must
be sent to an authorised NOVIPro repair shop.
Check that the press jaw and drive rolls move freely.
Check the bolt for signs of damage at regular intervals. Have damaged bolts replaced by an au-
thorised NOVIPro repair shop.
Clean and grease the drive rolls, the bolt and press jaws when you have finished work.
Use only high quality pressing or ball bearing grease.
The pressing contour must be kept free of grease.
All other servicing, maintenance and repair work must be carried out by an authorised NOVIPro
repair shop.
If the seal is damaged the warranty will be null and void.
After 10.000 pressing cycles or 1 year have the machine serviced by an authorised NOVIPro
workshop.
When dispatching the machine ensure that it is packed in its carrying case completely with bat-
tery and charger in the carry case only.
Electro-hydraulic machine does not exceed 3 hours in a -5° C / 23°F storage.
Disconnect battery from machine before storing.
Charger:
If the supply cord of this appliance is damaged, it must only be replaced by a repair shop ap-
pointed by the manufacturer, because special purpose tools are required.
5

Customer service

Order your accessories and spare parts from your specialist retailer or using our customer ser-
vice:
Dahl Sverige AB
Box 67
177 22 Järfälla
www.dahl.se
Teknisk support
020-58 30 00
tks@dahl.se
20
Charger ready for operation lights up green
Charger is defective
LED right (3)
flashes green
lights up red
flashes red
ENGLISH
Charging started
Battery is fully charged
Battery is defective
Battery is too hot or too cold