Digital Protocols - Nice HSCU2 Instrucciones Y Advertencias De Instalacióna

6.8 - Digital protocols

This menu allows you to configure the protocols for connecting with CONTACT
ID and CESA 200 BAUD surveillance control panels (fig. 50) . To program these
protocols, you must contact Nice customer service to request the "Digital pro-
tocols" manual .
50
Devices
Messages
Phone book
Settings
Digital Prot.
Event List
Test
NOTE ON DISPLAY
(6)
(1)
(4) (name)
ALL
INSTALL
OPEN
BATT
CANC
CONTROL PANEL
SERVICE CENTRE
CHV
COD
CONTACT ID
D
DISINS
FIL
IN A (or B / C / D / E / F)
(7) INSER
INTERF
KO:
NO COVERAGE
POWER FAILURE
NO LINE
MANOM
NO:
OC
(5) OK
PROG
REMOTE
RIV
RIV OFF
RIV ON
S
SUPERV
Contact ID 18 1 A
Contact ID 18 1 B
CESA 200 Baud 2A
CESA 200 Baud 2B
TABLE 9
MEANING OF MESSAGE
date / time of event
date / time of call
name of person/agency called (in phone book)
alarm
access to menu with installer code
fixture open
low battery
system reset
alarm system control panel
call from service centre
transponder key
access code
call to security company
digital protocol message
disarming
wired input
partial arming
total arming
radio interference
call not successful
no connection to the GSM network
no mains power
no connection to the PSTN line
Tampering
call not answered
called number occupied
call successful
programming
remote phone operation
sensor/detector
detector disabled
detector enabled
SMS Msg
no supervision
6.9 - Displaying the HSCU2 alarm system event lists
The control panels record all events (arming, disarming, alarms, etc .), along
with their date, time, name of operator and device (see table 9) .
The memory stores the 200 most recent events in a FIFO list, so that the 201st
event overwrites the 1st event, and so on . To check the event list, proceed as
follows:
01. Select and enter the "Installer" or "User" code .
Scroll through the main menu and select "Event list" (fig. 51) .
02. The most recent event will display; the first line shows its date and time, the
second its description . The events are recorded in abbreviated form; the
abbreviations and their meanings are given in examples 1 and 2 .
03. To display the list of events in full, scroll through it with the
04. To quit, press
51
Devices
Messages
Phone book
Settings
Digital Prot.
Event List
Test
keys
...
...
...
...
...
...
English – 27