STEINEL IS 2160 Instrucciones De Montaje página 17

Malfunction
Does not switch 'OFF'
Keeps switching 'ON'/'OFF'
Switches 'ON' when it
should not
Reach modification
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com
Cause
Continued movement

in detection zone
Light is in detection

zone and keeps switch-
ing on as a result of
temperature change
Set to continuous ope-

ration by indoor series
switch
Light is in detection

zone
Animals moving in

detection zone
Wind is moving trees

and bushes in the de-
tection zone
Cars in the street are

being detected
Sudden temperature

changes due to wea-
ther (wind, rain, snow)
or air expelled from
fans or open windows
Change in ambient

temperatures
Remedy
Check detection zone

and re-adjust if neces-
sary or fit shrouds
Readjust zone

Set series switch to

automatic mode
Change zone, increase

distance,
reduce output
Tilt sensor higher or

apply specific shrouds,
adjust detection zone
or fit shrouds
Adjust detection zone

or fit shrouds
Change detection

zone, tilt sensor down
Adjust detection zone

or change site of in-
stallation
When it is cold,

shorten reach by tilting
sensor down
When it is hot, tilt

sensor up
17