Operating Sliding Fence; Removing Sliding Fences - Bosch CM12SD Instrucciones De Funcionamiento

BM 1609B04985 11-14_CM12SD 11/12/14 2:52 PM Page 25
WARNING
blade, extend the sliding fence and sliding base
extensions when making extreme bevel, miter or
compound cuts, figure 29.

Operating Sliding fence

1. Loosen the fence lock knob counter clockwise ½
turn to loosen fence (see figure 30).
2. Slide fence to the desired position.
3. Tighten the lock knob clockwise to lock fence
position.

Removing Sliding fences

The sliding fence may need to be removed when
preforming extreme bevel cuts and most compound
cuts.
1. Loosen the fence lock knob counter clockwise 4
rotations, see figure 30.
2. Lift and remove fence.
preparing for Saw Operations
Workpiece Support
Sliding fence
To provide sufficient (minimum
6") spacing from hand to saw
Sliding
fence
fence lock
Knob
25.
FIG. 29
Sliding
fence
FIG. 30