Safety Regulations; Layout And Items Supplied - Hurricane HMH-E 2440 Manual De Instrucciones

Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.

1. Safety regulations

The corresponding safety information can be
found in the enclosed booklet.
Danger!
Read all safety regulations and instructions.
Any errors made in following the safety regula-
tions and instructions may result in an electric
shock, fi re and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
Description of the warning sign (see Figure
10) on the machine
1. Important! Read the operating instructions
and follow the warnings and safety instruc-
tions
2. Take care when the blades are rotating. Do
not put your hands or feet into openings when
the machine is running.
3. Important! Keep other persons and animals
away from the danger zone.
4. Important! Protect the machine from the
damp and never expose it to rain.
5. Important! Always wear safety goggles, ear
muff s, protective gloves and heavy-duty work
clothes!
6. Always set the ON/OFF switch to OFF and
pull the power plug out of the socket-outlet
before doing any work on the shredder, e.g.
cleaning the shredder and making adjust-
ments, or if the power cable becomes dama-
ged.
7. Protection class II; double-insulated
8. Noise emission complies with Directive
2000/14/EC!
Anl_HMH_E_2440_SPK7.indb 16 Anl_HMH_E_2440_SPK7.indb 16
GB

2. Layout and items supplied

2.1 Layout (Fig. 1/2)
1 Loading funnel inlet
2 Loading funnel
3 Motor housing with cutter plate
4 Prodder
5 Complete chassis
6 Wheels
7 Axle
8 Transport handle
9 Mains plug
10 Mounting for prodder
11 On/Off switch
12 Release screw
13 Wheel hubs
14 Ring wrench
15 Allen key
16 Screw for chassis assembly
17 Washer for chassis assembly
18 spacer sleeve
19 Sleeve
20 Washer, outside
21 Nut
22 Shredded material bag
23 Hook for shredder debris bag
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
- 16 -
27.04.15 15:18 27.04.15 15:18