Leckey Mygo Stander Manual Del Usuario página 29

9.6 Secondary Footplate
Angle
To set the angle to accommodate plantar-
flexion or dorsi-flexion, simply loosen the
Allen bolt located by the knee post to the
inside of the footplate (a), place in the
required position and then retighten the bolt
securely. 10° of flexion is accommodated in
each direction.
9.7 Adjusting the Hip
Laterals
To set the width of the hip laterals, loosen
the Allen bolts at the back of the hip pad (a),
adjust to desired width and retighten.
A
A