Peg-Pérego After-Sales Service; Serial Numbers; Cleaning And Maintenance - Peg-Perego sí Instrucciones De Uso

Pull the sack upwards (fig_g).
ATTACHING PRIMO VIAGGIO SL
You must first set the brakes on the stroller.
Lock the car seat onto the stroller without the baby.
The car seat must be fastened facing the mother at all
times.
If necessary, take off the stroller hood since it is already
fitted on the car seat.
Position the backrest of the stroller into the 2nd
central position (section 12).
Position the car seat handlebar into transport position
so that the straps can be easily fastened.
18• Push the button beneath the armrest and extend the
front bar, then simultaneously pull it out from both
sides (fig. a).
WARNING: Only extend the front bar when
attaching the Car Seat.
Lean and fit-in the car seat into the seat of the stroller
(fig. b).
19• First lock the strap buttonhole into the button of the
stroller (arrow 1), then pass through the strap behind
the handlebar of the car seat (arrow 2).
Lock the strap buttonhole into the button on the lower
part of the stroller frame (arrow 3) and then tighten
the strap until the car seat is completely fastened into
the stroller (arrow 4).
Follow the same procedures on the other side of the
stroller (fig. c).
Car seat locked correctly into the stroller (fig. d).
Releasing the car seat from the stroller:
loosen the belts;
unlock the strap buttonhole from the lower part of the
stroller frame; slip it off from behind the handlebar of
the car seat; then, unlock the strap buttonhole from
the stroller button.

SERIAL NUMBERS

20• The Stroller Si has all the following relevant
information behind the backrest: product name, date
of manufacture and serial number.
This information is required for any complaints.
THE ORIGINAL ACCESSORY PEG-PÉREGO
Peg-Pérego accessories are designed as a useful,
practical means of simplifying the lives of parents.
Discover all your product's accessories on
www.pegperego.com

CLEANING AND MAINTENANCE

Cleaning must only be carried out by adults.
PRODUCT MAINTENANCE: protect from the weather:
water, rain, or snow; prolonged and continuous
exposure to bright sunlight may give rise to colour
changes of various different materials; store this product
in a dry place. The maintenance have to be regularly.
CLEANING THE CHASSIS: periodically clean all plastic parts
with a damp cloth. Do not use solvent or similar cleaning
products; keep all metal parts dry to prevent rusting; keep
moving parts clean (adjustment mechanisms, locking
mechanisms, wheels, ...) and free of dust and sand and, if
necessary, lubricate with light machine oil.
CLEANING FABRIC PARTS: Brush the fabric parts to
remove dust.
• When washing, closely follow the instructions stated
on the label sewn into the cover.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
• Do not remove stains with solvents.
• Do not tumble dry.
PEG-PÉREGO S.p.A.
Peg Perego SpA adopts a quality management system
certified by TÜV Italia Srl in accordance with the ISO 9001
standard. Peg Pérego can make changes at any time to
the models described in this publication for technical or
commercial reasons.
PEG-PÉREGO AFTER-SALES SERVICE
If any parts of the item get lost or damaged, only
use genuine Peg Pérego spare parts. For any repairs,
replacements, information on the products and sales
of genuine spare parts and accessories, contact the
Peg Pérego Assistance Service and state the serial
number of the product, if present.
tel. 0039/039/60.88.213
fax 0039/039/33.09.992
e-mail assistenza@pegperego.it
website www.pegperego.com
All intellectual property rights on the contents of this
manual are property of PEG PEREGO S.p.A. and are
protected by the laws in force.
- 14 -