8 Cleaning of the Unit
The six lenses should be cleaned at regular intervals,
depending on impurities caused by dirt, smoke or other
particles. Only this will ensure that the light is radiated
at maximum brightness. For cleaning, disconnect
the mains plug from the socket. Only use a soft,
clean cloth and a glass cleaner.
For cleaning the other parts of the housing, only use
a soft, clean cloth. Never use any fluid; it may leak into
the unit and cause damage.
9 Specifications
LED-810DMX
Power supply
230 V~ / 50 Hz
Power consumption
25 VA
1 × RGB-LED
Light source
(red, green, blue)
3 W
Ambient temperature 0 – 40 °C
Dimensions
250 × 200 × 160 mm 220 × 195 × 170 mm
Weight
2,7 kg
All rights reserved by MONACOR
be reproduced in any form or by any means for any commercial use.
LED-812DMX
230 V~ / 50 Hz
45 VA
1 × RGB-LED
(red, green, blue)
10 W
0 – 40 °C
2,9 kg
®
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may
9.1 DMX channels
DMX value
Function
Channel 1: dimmer/stroboscope
0 – 7
light off
dimmer: dark → bright
8 – 199
stroboscope: slow → fast
200 – 247
248 – 255
maximum brightness
Channel 2: colour
0 – 7
colour 1 (green)
8 – 15
colour 2
16 – 23
colour 3
...
...
248 – 255
colour 32 (white)
Channel 3: rotation
0 – 9
Stop
fast → slow
10 – 120
121 – 134
Stop
slow → fast
135 – 245
246 – 255
Stop
Subject to technical modification.
GB
11