Replacing The Rechargeable Battery - Miele Triflex HX1 Instrucciones De Manejo

 Cut any threads or hairs that have
wound themselves around the roller
brush with a pair of scissors. To guide
the scissors, move along the guide
track on the roller brush.
Then run the vacuum cleaner to va-
cuum up the cut threads and hairs.
Removing the roller brush (Fig. 41)
(Not possible with the handheld brush)
You can take the roller brush out of the
Electrobrush in order to remove stub-
born soiling and clean the inside of the
Electrobrush.
 Unlock the cover on the side of the
Electrobrush so that the  symbol
becomes visible.
 Lift the cover up as far as it will go.
 Remove the roller brush.
 Clean the roller brush and remove
any stubborn dirt inside the Electro-
brush.
 Reassemble the Electrobrush in re-
verse order.

Replacing the rechargeable battery

An original Miele AP01 lithium-ion re-
chargeable battery (HX LA) is required.
Follow the instructions regarding the
handling and disposal of rechargeable
batteries found in the following sec-
tions: "Warning and safety", "Caring
for the environment" and "Installation
and connection" ("General battery in-
formation").
en
53