Troubleshooting; Warranty - Wolf Garten LI-ION POWER FINESSE 30 R Instrucciones De Funcionamiento

Cleaning or replacing the blade
D E F G H
3
Blunt blades should not be resharpened but replaced.
1. Lift the locking mechanism
to the back (2).
2. Remove the blade from the battery-powered shears.
3. Grease the plastic ring of the blade
4. Clean the visible part of the gearbox and lubricate it with grease
if necessary.
5. Fix the blades in place on the gearbox cover
6. Slide the sliding shoe over the battery-powered shears until the
locking mechanism engages
snap into the gearbox).

Troubleshooting

Problem: Possible causes:
•
Blades run hot
•
•
Motor fails to start
•
Problems when
•
charging the battery
Jerky run, machine
•
heavily vibrating
If in doubt, bring your tool to a WOLF-Garten service workshop.
1
Switch off the battery-powered shears before examining them or working on the blade.

Warranty

The warranty rules issued by our company or the importer apply to
every country. As part of the warranty, we remedy malfunctions on
your appliance free of charge provided that this malfunction is
caused by a material or manufacturing defect. In the event of a
warranty claim, please turn to your dealer or the nearest branch
office.
G
D (1) and pull the sliding shoe away
F using petroleum jelly.
.
E
G H (blade will automatically
Blade is blunt
too much friction due to insufficient lubrication
Battery flat
Battery defective
Battery or charger defective
Blade damaged
Remedy:
• Replacing the blade
• Use petroleum jelly to grease the plastic ring of the
blades
• Recharge battery
• Take the unit to the WOLF-Garten service workshop
• Take the unit to the WOLF-Garten service workshop
• Replacing the blade
13