Stereo Inputs ; Footswitch - Peavey PVi PORTABLE Manual De Operación

24) & 30) STEREO INPUTS - Stereo phono (RCA) input jacks and 1/4" TRS jacks (wired for Tip=Left, Ring=Right and
Sleeve=Ground, the standard format of commercially available cables) designed for use with a tape player, DVD
player, or any other stereo source.
Note: These connectors are set at a constant "line level."
25) STEREO OUT - The Tape Output RCA jacks provide a mix output that is independent of the Master Level controls.
Connect these to the inputs of a recording device, such as a cassette or DAT recorder, to record your event. Changes
made during the performance to the input level controls, channel EQ, and reverb controls will be heard in the Tape
Out mix. Changes made to the master level controls will not effect the level of the recording. Adjust recording
levels according to the instructions on your recording device.
®
26) EFX / AUX SEND - Although the PV i PORTABLE is already equipped with onboard digital effects, an external
effects processor can be incorporated into the PVi PORTABLE's signal flow. This 1/4" output jack is designed to
send the signal from the EFX/LEVEL control to an external device. The signal can then be routed back to the PVi
PORTABLE via the EFX/AUX Return input (33) and controlled by EFX/AUX level control (12).
27) FOOTSWITCH - Connect an optional ON/OFF, 1/4" jack footswitch to this input in order to mute the digital
effects when the switch is depressed.
Optional accessory: Peavey Push ON/OFF Button Switch (item number 03051000).
28) & 29) AMPLIFIER SEND / RETURN JACKS - Each channel of the power amplifier has a Send and Return jack.
These jacks provide a point to insert an equalizer or other processor into the sound system.
31) SPEAKER OUTPUTS - These are speaker level (powered) output jacks designed to feed each of your PVi
PORTABLE speaker enclosures. Use the enclosed cables (or other speaker cables) to connect the PVi PORTABLE's
speakers to the power tower.
WARNING: These are powered speaker outputs. Plugging anything other than the appropriate speakers into these
outputs could damage the PVi PORTABLE and/or any other device not design to accept a powered output.
33) EFX/AUX RETURN - Plug in your external effects signal processor's output signal here. This 1/4" input stereo
jack is designed to accept signals from an external effects unit. This input can also be used as an additional stereo
input.
38) POWER SWITCH - Turns the AC power ON and OFF. When the switch is in the OFF position, the PVi PORTABLE
is completely shut down.
36) POWER LED INDICATOR - This LED illuminates when the power is turned ON.
37) PROTECT LED INDICATOR - This LED illuminates if the power sound system output connection is shorted or the
load impedance is too low.
MP3 PLAYER
Using the MP3 player is simple. Just place the MP3 files on a USB flash memory stick in the root directory, and the
PVi PORTABLE will automatically recognize the tracks and begin playing them when plugged into the USB input.
Note: Every attempt has been made to ensure the PVi PORTABLE's USB is compatible with MOST USB flash memory
devices, but we cannot ensure it will be compatible with all. If you experience problems with the USB MP3 player,
the first step is to try another USB flash memory device.
39) Play and Pause button.
40) Press button for the previous track. Hold button to increase volume.
41) Press button for the next track. Hold button to decrease volume.
42) EQ adjustment. Press this button to change the automatic EQ setting for the USB MP3 player.