Problem
The robot vacuum
cleaner does not react.
Cause and remedy
The robot vacuum cleaner is switched off.
Switch it on (press I/0 to I).
The batteries in the remote control have been inserted
incorrectly.
Take care with the polarity.
The batteries in the remote control are dead.
Exchange the batteries.
The signal between the infrared transmitter on the va-
cuum cleaner and the remote control is broken.
Clean the front of the robot vacuum cleaner and
the top of the remote control carefully with a soft,
dry cloth and make sure that no items disrupt the
signal.
The remote control is too close to the robot vacuum
cleaner or too far away from it.
Increase or decrease the distance and when using
the remote control, direct it towards the robot va-
cuum cleaner.
en
67