Before you start
Setting mode
You can change the sound, auto door open function, rinse aid level, and water hardness
settings to your preference.
Entering the Setting mode
1. Turn the dishwasher on.
2. Press and hold the AUTO cycle button for five seconds within 60 seconds from turning
on the dishwasher.
- When you entered the Setting mode, the display will show "0:00".
Sound setting
You can turn the sound on or off.
1. Press the Lower rack only button to select the sound setting menu.
- The display shows the current setting. (Default setting: "U1")
2. Press the AUTO cycle button to change the setting.
- U0: Sound off
- U1: Sound on
3. Wait 5 seconds to save the setting.
Auto door open function setting
You can set the dishwasher to automatically open the door after each cycle for better
drying results.
1. Press the Speed Booster button to select the auto door open function setting menu.
- The display shows the current setting. (Default setting: "A1")
2. Press the AUTO cycle button to change the setting.
- A0: Function disabled
- A1: Function enabled
3. Wait 5 seconds to save the setting.
50
English
DW7500RM_DD81-02968F-01_EN.indd 50
2019-10-23
3:10:04