Unitekno C201A Instrucciones De Uso Y Mantenimiento página 13

HOW TO FASTEN THE PIECES
TOGHETER
All the pieces have a bayonnet joint.
To connect the handle to the exten-
sions or to the accessories simply
insert and push as shown in the
drawing (A). To extract the accessory
turn the ring clockwise and pull (B).
LARGE BRUSH
The large brush can be used together
with a cloth. The two spring clamps
fasten the cloth at the sides.
1. Press on the writing "open"
to block the clamp in an open
position.
2. Place the cloth in the correct
position. 3. Press on the writing
"close" to block the cloth.
Accessories may differ from those represented by type and quantity. Those indicated only explain liaisons and possible uses.
The large brush has an articulated
joint so that the handle can be tur-
ned 90° to the right and to the left.
To bend the large brush, lift the tab
and pull it in the direction shown in
the diagram so as to free the handle.
To lock the handle into position:
hold it upright, turn the tab in the
opposite direction to the one shown
in the diagram.
NOZZLE
This is attached to the extensions
or directly on to the handle. It
can reach even the most awkward
corners.
MEDDLERS AND SCRAPER
This enables special points to be
cleaned which would be otherwise
inaccessible to the other accessori-
es. They are attached to the end of
the nozzle.
WINDOW CLEANER
This is attached to the extensions
or directly on to the handle.The win-
dow cleaner combines steam with
the mechanical action of a rubber
spatula.
TRIANGULAR BRUSH
This is attached to the extensions or
directly on to the handle.
Can be used to clean fabric.
A cotton or microfiber cloth can
be fixed to the brush for cleaning
operations.
IRON
For instructions on how to use the
iron please refer to the relevant
instruction handbook.
Other accessories are available as
optional.
11