Unitekno C201A Instrucciones De Uso Y Mantenimiento página 18

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 35
MAINTENANCE
A certain amount of deposit will form
inside the heater according to how
much it is used and how hard the
water is.
HOW TO REMOVE DEPOSIT
FROM THE HEATER
Check that no accessory is connected
to the steam generator. Unscrew the
metal cap on top of the heater unit.
Pour 1/2 a glass of white wine vinegar
into the empty heater and screw on
DISPOSAL INSTRUCTIONS AND ENVIRONMETAL STANDARDS
The technical data and information given in this handbook are not binding. The manufacturer reserves the right to carry out
any necessary modifications without prior notice or replacement.
16
the cap. Make sure that there is water
in the cold water reservoir.
Switch on the heater until the correct
temperature has been reached.
Switch off the appliance and wait until
the internal pressure has subsided.
Unscrew the metal cap again, empty
the heater and rinse thoroughly with
clean water.
Close by screwing on the metal cap.
Do not empty the steam through the
iron or the nozzle.
Dispose of packaging and used filters in accordance with current standards. Follow the instruc-
tions for any material recycling (segregated collection) in your area. The symbol of a crossed out
basket on the device specifies that the product should be disposed of separately from domestic
waste at the end of its useful life.
The user is responsible for taking device to an appropriate collection device to an appropriate
collection point. Suitable segregated collection for ensuing recycling, treatment and environmen-
tally compatible disposal helps prevent potentially negative effects on the environment and on
health and favors recycling of the product' s materials. For more detailed information on available
collection systems, consult your local waste disposal service or the shop where the shop where the
product was purchased.
HOW TO REMOVE DEPOSIT
FROM THE COLD WATER
RESERVOIR
The cold water reservoir is controlled
by sensors, which may not work
properly when there is calcium
build-up. Therefore occasionally it is
necessary to pour 1/2 glass of white
vinegar in the cold water reservoir,
and then to spray a generous amount
of steam into the reservoir using the
steam nozzle. Following this opera-
tion, rinse well with water.

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido