Edirol UM-1X Manual Del Usuario página 27

■
Setting the Driver
If you are using FreeMIDI, proceed to FreeMIDI Settings
(p. 30).
OMS Settings
1
Set the UM-1X's ADVANCED DRIVER switch to the
ON position.
2
Connect the USB cable of the UM-1X to your
computer.
fig.3-3
3
From the CD-ROM, drag the
Driver E (Mac OS 9, 8) – OMS
Setting folder into the Opcode–
OMS Applications folder on the
hard disk of your Macintosh to
copy it there.
fig.3-4
4
In the Opcode-OMS Applications
folder where you installed OMS,
double-click OMS Setup to start it
up.
fig.3-5e
5
If a dialog box like
the one shown here
appears, click [Turn
It Off].
A confirmation
dialog box will then
appear, so click [OK].
Getting Connected and Installing Drivers (Macintosh)
Installation will not occur
correctly if the switch is turned
OFF.
To prevent malfunction and/
or damage to speakers or other
devices, always turn down the
volume, and turn off the
power on all devices before
making any connections.
27