Edirol UM-1X Manual Del Usuario página 29

fig.3-10e
9
From the File menu,
choose Make Current.
If you are unable to select
Make Current, it has already
been applied, and you may
continue to the next step.
10
Verify that MIDI
transmission and reception can be performed
correctly.
From the Studio menu, choose Test Studio.
fig.3-12
11
If you have connected a
MIDI sound module to the
UM-1X's MIDI OUT
connector, click the MIDI
connector icon shown in
the diagram at right. If
sound is heard from the
sound module, the
settings are correct.
When you move the mouse
cursor near the sound generator icon, the cursor will change
to a shape.
12
Exit OMS Setup.
From the File menu, choose [Quit]. If the AppleTalk
confirmation dialog box appears, click [OK] to close the
dialog box.
13
Make MIDI device settings on your sequencer
software.
In the MIDI input/output settings of your sequencer
software, select the UM-1X's Port 1.
This completes connections for the UM-1X and Macintosh,
and installation of the MIDI driver.
Getting Connected and Installing Drivers (Macintosh)
There will be no sound if you
have not connected a MIDI
sound module to the UM-1X.
For details on connecting your
MIDI sound module, refer to
the owner's manual of your
MIDI sound module.
For details on MIDI device
settings, refer to the owner's
manual of your software.
For information on the MIDI
equipment you connect to the
UM-1X, please contact the
manufacturer of your MIDI
equipment.
29