General safety instructions
Cleaning and user maintenance must not be carried
out by children without supervision.
Children must not play with the device.
2.2
Safety when installing the device
CAUTION!
!
Ensure that the device is standing firmly!
The device must be set up and fastened in such a
way that it cannot tip over or fall down.
NOTICE!
A
Do not expose the device to a heat source (such as
direct sunlight or heating). Avoid additional heating of
the device in this way.
For installation on boats:
If electrical devices are incorrectly installed on boats,
corrosion damage might occur.
Have the inverter installed by a specialist (marine)
electrician.
Electrical cables
CAUTION!
!
Lay the cables so that they cannot be tripped over or
damaged.
NOTICE!
A
If cables have to be fed through metal walls or other
walls with sharp edges, use ducts or tubes to prevent
damage.
Do not lay cables which are loose or bent next to
electrically conductive material (metal).
Do not pull on the cables.
Do not lay the 230 V mains cable and the 12 V DC
cable in the same duct!
16
CoolPower EPS100
EN