Before First Use - Ninja BL610 Guia Del Usuario

Before First Use

PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
IMPORTANT: Make sure that the motor base
is plugged in for use.
IMPORTANT: Never add ingredients into the
container before placing the Blade Assembly
in first.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it
may result in damage to the accessories.
11 1-877-646-5288
WARNING: Stacked
Blade Assembly is
sharp and not locked in
place. If using the pour
spout, ensure the lid
is fully locked onto the
blender pitcher. Failure
to do so will result in a
risk of laceration.
WARNING: Stacked
Blade Assembly is sharp
and not locked in place.
If pouring with the lid
removed, carefully
remove the Stacked
Blade Assembly first,
holding it by the shaft.
Failure to do so will
result in a risk of laceration.
CAUTION: Do not immerse the motor base into
water or any other liquid.
1
Remove all packaging material and labels from the
appliance. Separate/remove all parts from each other.
2 Wash the lid, pitcher and Stacked Blade Assembly
in warm, soapy water. When washing the blade
assemblies, use a dish-washing utensil with a handle to
avoid direct hand contact with blades
CAUTION: Handle the Stacked Blade Assembly with
care when washing, as the blades are very sharp.
3 Handle blade assemblies with care to avoid contact
with sharp edges. Rinse and air dry thoroughly.
4
The pitcher and Stacked Blade Assembly are dishwasher
safe. It is recommended that the lid and Stacked Blade
Assembly be placed on the top rack. Ensure that the
Stacked Blade Assembly is removed from the pitcher
before placing in the dishwasher.
5
Wipe the motor base clean with a damp cloth.