BWT Avanti WF Instrucciones De Montaje página 12

GB GB GB GB
GB
5 5 5 5 5
A A A A A
D D D D D
E E E E E
G G G G G
1 2 1 2 1 2
1 2 1 2
1 1 1 1 1
3 3 3 3 3
4 4 4 4 4
B B B B B
C C C C C
F F F F F
Operation Operation Operation
Operation Operation
The filter must be checked at regular intervals, i.e.
every two months.
Water is a consumable liquid. When exchanging Water is a consumable liquid. When exchanging Water is a consumable liquid. When exchanging
Water is a consumable liquid. When exchanging Water is a consumable liquid. When exchanging
the filter, proper h the filter the filter the filter the filter , proper h , proper h , proper hygiene m , proper h ygiene must be ensured. ygiene m ygiene m ygiene m
Exchanging the filter element Exchanging the filter element
Exchanging the filter element Exchanging the filter element Exchanging the filter element
The filter element must be replaced if due to in-
creasing dirt accumulation on the filter cloth there
is a noticeable drop of the water pressure, or after
6 months at the latest.
A A A A A Close the stop valves before and after the filter
and provide a collecting basin under the filter.
Open discharging screw (4 4 4 4 4 ) for pressure relief
and empty the filter.
B B B B B Open transparent cylinder (3 3 3 3 3 ) manually (no
tools! tools! tools!), remove filter element (5 5 5 5 5 ) and dispose of tools! tools!
it.
Clean the transparent cylinder.
The plastic parts may only be cleaned with a The plastic parts may only be cleaned with a The plastic parts may only be cleaned with a The plastic parts may only be cleaned with a The plastic parts may only be cleaned with a
soft, damp cloth. Do not use any solvents or soft, damp cloth. Do not use any solvents or
soft, damp cloth. Do not use any solvents or soft, damp cloth. Do not use any solvents or soft, damp cloth. Do not use any solvents or
detergents nor acid cleaners. detergents nor acid cleaners. detergents nor acid cleaners.
detergents nor acid cleaners. detergents nor acid cleaners.
C C C C C Leave the plastic bag on the new filter element
when holding it. Open the bag at the insertion
end of the filter element.
D D D D D Insert the filter element (5 5 5 5 5 ) into the top section
(1 1 1 1 1 ).
E E E E E Remove the plastic bag. Make sure not to touch
the filter element with your hand.
F F F F F Screw the transparent cylinder (3 3 3 3 3 ) into the top
section (1 1 1 1 1 ) and fasten it manually. Close the
discharging screw (4 4 4 4 4 ).
G G G G G Slowly open the stop valves, first those before,
then those after the filter. Check the filter for
proper sealing (visual inspection) and then
deaerate the pipe at the bleeding point closest
to the filter (after the filter).
ust be ensured. ust be ensured. ust be ensured. ust be ensured.
no no no no