Technical Specifications - Facom NU-CL.P/1005 Manual De Instrucciones

Machines elements
1 : operating trigger with variator
2 : rotational direction switch
3 : LED light switch
4 : LED - Light Emitting Diode
5 : slow / fast speed selector
6 : screwing torque selector (16 screwing positions + 1 drilling position)
7 : battery release button
8 : rubber protective pads
9 : charge and alarm indicators
10 : charger terminals protective cover
SPARE PARTS
A: spare chucks (10 mm: CL.PM10 - 13 mm: CL.PM13)
B: spare batteries (12 V: CL.BA12 – 14.4 V: CL.BA14)
C: universal charger (CL.CH919)

Technical specifications

Machines
Chuck capacity
Max steel drilling
Max wood drilling
No-load motor voltage
No-load speed (slow)
No-load speed (fast)
Torque setting
Max torque
Weight, battery excl.
Batteries
Type
Nominal voltage
Capacity
Weight (battery alone)
Universal charger
Charge capacity
Temperature of use
Dimensions (charger only)
Weight (charger alone)
The universal charger automatically detects the FACOM accumulators charging voltage (9.6 to 19.2 Volt). It
automatically regulates when the accumulator is charged, preventing any damage if the set is left powered on after
the required charging time.
Note: the CL.CH919 universal charger is compatible with all of FACOM electrically powered tools (CL.P1210,
CL.P1413, CL.V146 and CL.C1913)
NU-CLP_1005
CL.P1210D
10 mm
10 mm
35 mm
12 V
0 - 300 rev/min
0 - 1100 rev/min
16 positions + drilling
35 N.m
1,4 kg
CL.BA12
Ni-Cd
12 V
2 Ah
0,7 kg
CL.CH919
9,6 to 19,2 Volt for Ni-Cd and Ni-MH batteries
between 10˚C and 40˚C
180 x 116 x 67 mm
0,6 kg
10
CL.P1413D
13 mm
13 mm
40 mm
14,4 V
0 - 340 rev/min
0 - 1180 rev/min
16 positions + drilling
40 N.m
1,5 kg
CL.BA14
Ni-MH
14,4 V
2,6 Ah
0,8 kg
18/11/05, 9:06