Equalizer Master 1 & 2 - LD Systems AM 8 Manual De Usuario

EQUALIZER MASTER 1 & 2
1
2
7
15-BAND FULLY PARAMETRIC EQUALIZER WITH BELL FILTER AND VARIABLE QUALITY OF FILTER
1
BYPASS
Click on "BYPASS" to disable the equalizer and high-pass filter and once more to re-enable both (sound comparison before - after). If the
equalizer is disabled, the "BYPASS" button is highlighted in blue.
2
RESET
To reset the equalizer, click on "RESET". This operation is not reversible.
3
FREQUENZ (HZ)
The frequency to adjust for each individual source of the 15-band equalizer can be chosen individually from 20 Hz to 20,000 Hz. For this
purpose, use the frequency field to enter the desired frequency, or the arrow buttons, next to the frequency field. Frequency and Gain can be
changed at the same time using one of the 15 points in the graphic representation of the frequency curve (click, hold and drag).
4 5
GAIN (DB)
The gain (+/-15 dB) of the respective frequency band is achieved by means of direct entry into the gain field using the arrow buttons next to
the gain field, or through the use of the virtual fader (N°5). Frequency and Gain can be changed at the same time using one of the 15 points
in the graphic representation of the frequency curve (click, hold and drag).
6
Q-FACTOR
The value of the Q factor of the respective filter (filter quality) can be entered directly into the corresponding input field, or by using the
arrow buttons to the right of the input field (Q-factor 0.3 to 20).
7
GRAPHICAL EQUALIZER DISPLAY
The graphical representation of the EQ curve is used for quick and clear overview of the equalizer settings. Frequency and Gain can be
changed at the same time using the 5 points in the graphic representation of the frequency curve (click, hold and drag). Each dot represents
a frequency.
3
4
5
6
17