Fantek FT-6860 Manual De Instrucciones página 40

LOAD DATA
Before placing a load, make sure that it can be raised to the maximum height of the tower. Otherwise it could
cause an accident or damage the tower.
Place of the load.
4. Determine the position where the load is to be placed and consult the tower capacity. Never exceed.
5. The "X" distance between the load is taken from the carrier to the end of the horns.
6. When it is possible, place the load as close to the carrier. This prolongs the life of the tower.
Figure 86
Place and position detal of the load.
USER MANUAL FOR P.A. TOWERS
14