Pc Camera; Pc Camera Driver Installation; Pc Camera Audio Setup - Clevo X7200 Manual Del Usuario

Concise User's Guide

PC Camera

The PC Camera module uses the BisonCap application
to capture video files.

PC Camera Driver Installation

1. Turn on the module using Fn + F10 or touch sensor
instant key (the LED will be highighted and the
on-screen visual indicator
played when the module is powered on).
2. Click Option Drivers (button).
3. Click 2.Install WebCam Driver > Yes.
4. Choose the language you prefer and click Next > Next.
5. Click Finish to restart the computer.
6. Run the BisonCap application program from the
BisonCam shortcut on the desktop, or from the Bison-
Cam item in the Start > Programs/All Programs
menu (if the hardware is turned off use the Fn + F10
key combination or touch sensor instant key
it on again).
20 - PC Camera

PC Camera Audio Setup

If you wish to capture video & audio with your camera,
it is necessary to setup the audio recording options in
Windows.
1.
2.
3.
will briefly be dis-
4.
5.
6.
7.
8.
9.
to turn
10. Go to the Capture menu heading and select Capture Audio (it
Click Start, and click Control Panel (or point to Settings and
click Control Panel).
Click Sound (Hardware and Sound).
Click Recording (tab).
Right-click Microphone (Realtek High Definition Audio) and
make sure the item is not disabled.
Double-click Microphone (or select Properties from the right-
click menu).
Click Levels (tab), and adjust the Microphone and
Microphone Boost sliders to the level required.
Click OK and close the control panels.
Run the BisonCap program from the Start > Programs/All
Programs > BisonCam menu.
Go to the Devices menu heading and select Microphone
(Realtek....) (it should have a tick alongside it).
should have a tick alongside it).