Bandluxe Hsdpa Utility; Bandluxe Hsdpa Application Installation - Lenovo B5130 Manual Del Usuario

over the network icon in the taskbar to display the connection
information.
7. You can then access the internet, download e-mail etc. as per
any internet connection.
8. While you are connected the indicators in the Mobile Partner
window will display uploading and downloading icons and a
network icon in the taskbar
9. To disconnect click the Disconnect
click the taskbar icon and select Disconnect.
10. The program will disconnect from the service provider.
11. The module will still be on, and you will need to press the Fn +
key combination to turn it off.
12. If you click the Mobile Partner close icon
be displayed asking you to click OK to confirm the program
exit and to terminate the connection.
13. Exiting the program terminates the connection, but DOES
NOT turn off the 3.75G/HSPA module, and you will need to
press the Fn + key combination to turn off the module.
14. If the module is on and the computer enters a power-saving
state, then the power status of the module on resuming from
the power-saving state will be as below:
• If the 3.75G/HSPA module is on and the computer is
Shut Down or Restarted; the module will be off when
the computer starts up.
• If the 3.75G/HSPA module is on and the computer
enters Sleep or Hibernate; the module will be off
when the computer resumes from sleep.
.
icon, or right
a message will

BandLuxe HSDPA Utility

With the 3.75G/HSPA module and USIM card (supplied
by your service provider) installed you may then install
the BandLuxe HSDPA Utility. The BandLuxe HSDPA
Utility application allows you to directly access your in-
ternet service from the computer.

BandLuxe HSDPA Application Installation

1. Make sure you enable power to the module by pressing
the Fn + key combination (the on-screen visual
indicator will indicate the module's power sta-
tus).
Note: If a Found New Hardware window appears,
click Cancel in all windows that appear, and then pro-
ceed to install the driver as below.
2. Click Option Drivers (button).
3. Click 3.Install 3G Driver > Yes.
4. Choose the language you prefer and click OK.
5. Click Next.
6. Click I Agree (button) to accept the license agreement.
7. Click Next > Install > Finish.
3.75G/HSPA Module - 23
Concise User's Guide