Problem - Cause - Solution - illy X1 Serie Manual De Instrucciones

PROBLEM - CAUSE - SOLUTION

PROBLEM CAUSE
Power cord not connected to a power socket.
The machine does not
switch on.
Power button switched to "0".
No water in the tank.
Capsule not inserted in the capsule holder.
The capsule inserted does not brew coff ee.
The machine does not
The button has not been pressed.
brew coff ee.
Water tank not engaged correctly.
Limescale on internal components.
Failure to start the pump.
Water comes out of the
Wrong capsule type.
group during brewing.
When I press the but- The machine is not ready.
ton, the machine does not
The steam wand is dirty or clogged.
dispense steam.
Steam is dispensed, but
The steam wand is clogged.
milk is not frothed.
The machine is off but the
Machine in power save status.
power button is set to "I".
Coff ee fl ows out of the
capsule during the fi rst
seconds of the brewing
process.
SOLUTION
Connect the plug to a socket conforming to the technical data indicated in the data plate under the base
of the machine.
Switch the power button to "I".
Fill the tank with water.
Insert one capsule in the capsule holder.
Insert a new capsule in the capsule holder and secure it to the dispensing spout; brew a cup of coff ee.
Press the or button again.
Make sure the water tank is fully inserted.
Descale the machine as described in the relevant section.
Try to dispense water with no capsule in the compartment.
Make sure that you have used an "Iperespresso" capsule for domestic use, identifi ed by the wording
"Single-dose ground coff ee capsules for domestic use" on the packaging for ESPRESSO or BREWED COFFEE.
Wait until the purple light is steady on.
Disassemble and wash the steam wand as described in the manual.
Turn off the machine and let it cool down. Disassemble the steam wand and remove any possible obstructions
form the steam dispensing holes. Reassemble the steam wand.
Turn on the machine by pressing the or
It is normal that coff ee fl ows out during the fi rst seconds of the brewing process.
button.
EN
Persistence of the
problem
Contact
an authorised
service
centre.
19