Publicidad
Idiomas disponibles
Idiomas disponibles
300 SERIES
U s e r m a n u a l
Breaking-in your loudspeakers
The speaker drivers used in the Integration 300 Series loudspeakers are complex mechanical assemblies
which need a break-in period to operate at their best and to become acclimatised to the temperature
and humidity of your environment. This break-in period varies depending on the conditions in question
and may take several weeks. To reduce this time, we recommend operating your loudspeakers for about
20 consecutive hours. Once the loudspeakers' characteristics have totally stabilised you will be able to enjoy
your Integration 300 Series loudspeakers' performance to the full.
Pre-installation wiring
You can only install your loudspeakers once you have wired them up. Make sure you leave enough room
to allow you to wire up your loudspeakers with ease (approximately 20"/ 50cm). We recommend using a
cable with a marker in order to ensure the polarities of the speaker drivers are respected (+/-). Choose good
quality cables with a cross-section appropriate to their length: your retailer will be able to advise you.
Choosing an amplifier
It is not an excess of amplifier power that can damage your loudspeakers and drivers but a lack of power.
Moreover, if the volume is turned too high, the amplifier saturates and generates parasite signals that may
destroy the tweeter. The dynamic capacity and definition of Integration 300 Series loudspeakers are high
enough to reveal the strengths and weaknesses of whatever amplifier is connected. Your retailer will be able
to guide your choice to suit your tastes and budget.
Installation
Existing installation
• Before installing your loudspeakers, make sure that there is nothing obstructing the ceiling/wall, such as
air vents, and make sure that no cables will interfere with the installation. Use the appropriate tools to help
you determine the correct location.
• Make sure there is enough space to install your product in the ceiling/wall.
• Trace the supplied cut-out template on the ceiling/wall. Cut along the trace using an appropriate tool to
make a circular hole in the ceiling/wall (fig. A).
New installation
• Use the specific optional mounting kit
• Wire the loudspeakers before carrying out the installation
Conditions of guarantee
All Focal loudspeakers are covered by guarantee drawn up by the official Focal distributor in your country.
Your distributor can provide all details concerning the conditions of guarantee. Guarantee cover extends at
least to that granted by the legal guarantee in force in the country where the original purchase invoice was
issued.
13
Publicidad
