First Use; Setting Up The Appliance; Preparing The Appliance - Silvercrest SMW 800 C3 Instrucciones De Uso

Ocultar thumbs Ver también para SMW 800 C3:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

First use

ATTENTION! MATERIAL DAMAGE!
Never operate the appliance when it is empty.
There is a danger of overheating, especially
in the "microwave" and "combination cooking
process" modes!

Setting up the appliance

WARNING! RISK OF FIRE!
GB
This microwave oven is not suitable for installa-
MT
tion in a kitchen cabinet. Sufficient ventilation for
the appliance cannot be assured in enclosed
cabinets. The appliance could be damaged
and there is an additional risk of a fire!
Select an level surface offering sufficient space
for the adequate ventilation of the appliance:
Ensure that you maintain a minimum clearance
of 10 cm from neighbouring walls/surfaces.
Make sure that the door of the microwave oven
can be opened easily.
Keep a gap of at least 20 cm free above the
microwave.
Ensure that the electrical plug is accessible with-
out problem, so that it can be easily reached
and removed in case of danger.
Do not remove the feet underneath the micro-
wave oven.
Do not block the ventilation openings
do, it could cause damage to the appliance.
Install the appliance as far away as possible
from radios and televisions. The operation of
the microwave oven can cause malfunctions
of radio and television reception.
76
ATTENTION! MATERIAL DAMAGE!
Do not install the microwave above a cooker
or any other appliance generating heat.
Installation in such a location could cause
damage to the appliance and thus invalidation
of the warranty.

Preparing the appliance

1) Remove all packaging materials and any
stickers from the appliance.
NOTE
2) Place the rotator assembly
in the cooking chamber so that this is fitted
securely onto the drive axle.
3) Place the glass plate
assembly
4) Insert the plug into a mains power socket.
Use a 230 - 240 V ~ , 50 Hz, mains power
socket with a 16 amp fuse. It is recommended
that the microwave oven is powered from its
own power circuit. If you are unsure about
how to connect the microwave oven, consult a
specialist.
. If you
Before using the microwave oven, the appliance
must be heated up without food to remove any
remaining production residues.
Place a microwaveable and heat-proof bowl filled
with water in the microwave.
Switch the appliance on in grill mode.
1) Press the Grill button
This selects Grill mode. The
in the display
2) Adjust the control dial
of 3 minutes.
Do not remove the light grey mica
cover plate, which is mounted in
the cooking chamber to protect the
magnetron.
on the drive axle
centrally on the rotator
.
once.
icon appears
.
to a cooking time
SMW 800 C3

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido