Ethernet; Art-Net™ Start Address; Art-Net™ Universe; Ip Address - Chauvet Professional VIP Drive 43s Manual Del Usuario

• Color Temperature:
a. Press the <SCROLL/ENTER> knob.
b. Use the <SCROLL/ENTER> knob to select from Full RGB or Custom.
c. Press the <SCROLL/ENTER> knob.
d. If Custom was selected, use the <SCROLL/ENTER> knob to select from Red Level,
Green Level, or Blue Level.
e. Press the <SCROLL/ENTER> knob.
f. Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to increase or
decrease the maximum value of the selected color, from 0–255.
g. Press the <SCROLL/ENTER> knob.
h. Repeat steps d-g until the color temperature is set as desired.
• Reset, press the <SCROLL/ENTER> knob.

Ethernet

The VIP Drive 43s can connect with an Art-Net™ controller to allow control of a majority of the product's
settings.
The Ethernet settings control the Art-Net™ and network addressing for the product.
To access the Ethernet menu:
1. Press <MENU> to access the menu.
2. Turn the <SCROLL/ENTER> knob until Ethernet is selected.
3. Press the <SCROLL/ENTER> knob.
Art-Net™ Start Address
The VIP Drive 43s uses 95 channels, which makes the highest recommended starting address 418.
1. Access the Ethernet
2. Turn the <SCROLL/ENTER> knob until Art-Net Start Address is selected.
3. Press the <SCROLL/ENTER> knob.
4. Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to increase or decrease the
address, from 1–512.
5. Press the <SCROLL/ENTER> knob.
Art-Net™ Universe
To select in which Art-Net™ universe the VIP Drive 43s is addressed:
1. Access the Ethernet
2. Turn the <SCROLL/ENTER> knob until Art-Net Universe is selected.
3. Press the <SCROLL/ENTER> knob.
4. Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to increase or decrease the
universe address, from 0–255.
5. Press the <SCROLL/ENTER> knob.

IP Address

To set the IP address of the VIP Drive 43s:
1. Access the Ethernet
2. Turn the <SCROLL/ENTER> knob until IP Address is selected.
3. Press the <SCROLL/ENTER> knob.
4. Press the <SCROLL/ENTER> knob again.
5. Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to increase or decrease the
first digit, from 000–255.
6. Press the <SCROLL/ENTER> knob.
7. Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to increase or decrease the
next digit, from 000–255.
8. Repeat steps 6 and 7 twice.
9. Press the <SCROLL/ENTER> knob.
15
menu.
menu.
menu.
O
PERATION
VIP Drive 43s User Manual Rev. 1