Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
O
PERATION
Position Settings
The Position Settings determine the individual offsets of each port.
1.
Access the
Map
2.
Turn the <SCROLL/ENTER> knob to select Position Settings.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to select from Port 1 X (port 1
horizontal offset), Port 1 Y (port 1 vertical offset), Port 2 X (port 2 horizontal offset), Port 2 Y (port
2 vertical offset), Port 3 X (port 1 horizontal offset), Port 3 Y (port 3 vertical offset), Port 4 X (port
4 horizontal offset), or Port 4 Y (port 4 vertical offset).
5.
Press the <SCROLL/ENTER> knob.
6.
Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to increase or decrease the
value, from 0–65535.
7.
Press the <SCROLL/ENTER> knob.
8.
Repeat steps 4-7 until the positions are set as desired.
Port Tutorial
The Port Tutorial settings provide 2 methods of mapping the size and number of pixels in the connected
panel assembly to the VIP Drive 43s.
To access the Port Tutorial menu:
1.
Access the
Map
2.
Turn the <SCROLL/ENTER> knob to select Port Tutorial.
3.
Press the <SCROLL/ENTER> knob.
Auto Port Tutorial
Selecting Auto under Port Tutorial will trigger the VIP Drive 43s to detect the panels connected to the
selected port.
1.
Access the
Port Tutorial
2.
Turn the <SCROLL/ENTER> knob to select from Port 1–4.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob to select Auto.
5.
Press the <SCROLL/ENTER> knob.
Manual Port Tutorial
Selecting Manual under Port Tutorial will allow the arrangement of panels and pixels per panel to be
entered precisely.
1.
Access the
Port Tutorial
2.
Turn the <SCROLL/ENTER> knob to select from Port 1–4.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob to select Manual.
5.
Press the <SCROLL/ENTER> knob.
6.
Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to increase or decrease the
horizontal number of panels, from 1–255.
7.
Press the <SCROLL/ENTER> knob.
8.
Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to increase or decrease the
vertical number of panels, from 1–255.
9.
Press the <SCROLL/ENTER> knob.
10. Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to increase or decrease the
horizontal number of pixels, from 1–999.
11. Press the <SCROLL/ENTER> knob.
12. Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to increase or decrease the
vertical number of pixels, from 1–999.
13. Press the <SCROLL/ENTER> knob. The total number of pixels will auto-populate.
VIP Drive 43s User Manual Rev. 1
menu.
menu.
menu.
menu.
30
Publicidad
Tabla de contenido
