3M Secure Click D3000 serie Instrucciones De Uso página 2

3
Secure Click Particulate Filters D3000 Series, P95
™
For use only with 3M™ Secure Click™ Facepieces according to the NIOSH Approval Label.
* 3M recommended for relief against nuisance levels of acid gases. Nuisance level acid gas refers to concentrations less than the OSHA PEL or
applicable government occupational exposure limits, whichever is lower.
** 3M recommended for relief against nuisance levels of organic vapor/acid gases. Nuisance level organic vapor/acid gas refers to concentrations less
than the OSHA PEL or applicable government occupational exposure limits, whichever is lower.
The D3071 and D3078 respirator filters have dual approval as United States (US) National Institute for Occupational Safety and Health (NIOSH) P95
particulate filters and as Brazil Ministry of Labor approved P2 SL particulate filters.
The D3076HF respirator filter has dual approval as a United States (US) National Institute for Occupational Safety and Health (NIOSH) Hydrogen
Fluoride/P95 particulate cartridge and as a Brazil Ministry of Labor approved P2 SL particulate filter, hydrogen fluoride – Class 1.
Specific information is provided where applicable. All other information is common to both standards.
This filter helps protect against certain airborne contaminants. Misuse may result in sickness or death. For correct use, consult
supervisor and User Instructions, or call 3M in U.S.A., 1-800-243-4630. In Canada, call Technical Service at 1-800-267-4414.
IMPORTANT
Before use, the wearer must read and understand these User Instructions, and the User Instructions for the 3M™ Secure Click™ Facepieces to be
used with these filters. Keep these User Instructions for reference.
Particulate Filter D3071, P95
Use For
- Solids such as those from processing minerals, coal, iron ore, cotton, flour, and certain other substances.
- Liquid or oil based particles from sprays that do not also emit harmful vapors.
- Metal fumes produced from welding, brazing, cutting and other operations involving heating of metals.
Do Not Use For
- Gases and vapors when concentrations are at or above the OSHA PEL, or applicable government regulations, whichever is lower, including
those present in paint spray operations, unless combined with approved chemical cartridges.
- Asbestos.
- Sandblasting.
Particulate Cartridge D3076HF, Hydrogen Fluoride/P95, with nuisance level acid gas relief*
Use For
- Solids such as those from processing minerals, coal, iron ore, cotton, flour, and certain other substances.
- Liquid or oil based particles from sprays that do not also emit harmful vapors.
- Metal fumes produced from welding, brazing, cutting and other operations involving heating of metals.
- Hydrogen fluoride.
- 3M recommended for relief from nuisance levels of acid gases such as sulfur dioxide and/or chlorine.
Do Not Use For
- Gases and vapors, other than hydrogen fluoride, when concentrations are at or above the OSHA PEL, or applicable government regulations,
whichever is lower, including those present in paint spraying operations, unless combined with approved chemical cartridges.
- Asbestos.
- Sandblasting.
* Nuisance level acid gas refers to concentrations less than the OSHA PEL or applicable occupational exposure limits, whichever is lower.
Particulate Filter D3078, P95 with nuisance level organic vapor/acid gas relief**
Use For
- Solids such as those from processing minerals, coal, iron ore, cotton, flour, and certain other substances.
- Liquid or oil based particles from sprays that do not also emit harmful vapors.
- Metal fumes produced from welding, brazing, cutting and other operations involving heating of metals.
- 3M recommended for ozone protection up to 10 times the OSHA PEL (Not NIOSH certified for use against ozone).
- 3M recommended for relief from nuisance levels of organic vapors.
- 3M recommended for relief from nuisance levels of acid gases such as sulfur dioxide, hydrogen fluoride and/or chlorine.
W WARNING
1
(English)
User Instructions