Multilaser RE034 Manual Del Usuario página 167

In this mode, the client utility differs from that in station mode, and the main interface is
as shown below.
When it is switched to AP mode, the wireless adapter will automatically set its IP address
as 192.168.123.1, and other clients that connected to this AP will automatically obtain
the IP addresses of: 192.168.123.X(X is any integer from 2 to 254).The function buttons
on the top (From L to R )are respectively Config AP, Advanced, Access Control List,
Associate List, About, Help, and MiniSize, while the left column displays Turn On/Off RF,
Security /No security, and AP mode icon.
4.2.1 Config AP
This screen is used to set the AP's general parameters including SSID, wireless mode,
channel, authentication type and encryption type, as shown in the picture below.
167