Contents Of The Packaging; Identification Plate - SDMO AT206 Manual De Uso

4.- DESCRIPTION OF CONTROL UNIT AT206
The control unit is comprised of:
an engine protection and control module for generating sets powered by diesel or petrol
measurement equipment for displaying the main electrical ratings
a control module for the two different power supply sources (Automatic Mains Failure)
an automatic switching unit for a load from two different power supply sources (Automatic Transfer Switch)
It enables the following:
the AC voltage to be monitored on screen for a single phase, three-phase or three-phase with neutral system
the load to be switched when the voltage is outside of the established limits.
4.1 – CONTENTS OF THE PACKAGING
The packaging must be received completely sealed and intact.
Inside the packaging, in addition to the electrical control unit, there will be an envelope containing a pair of mounting attachments (1), a
pair of spare fuses (2) and the instruction manual (3),
The identification plate provides the product details and is located inside the control unit and on the packaging box.
Check that the product received corresponds exactly to the product ordered.
4.1.1 – Identification plate
CEI EN 60 439-1
Supplier code: 063
Model: 31614263101NE
AUTO CONTROL UNIT POR
2PWITH CONTROL CABLE
ACV = 240V
C: 40A (AC1)
Frequency = 50Hz
Serial: no. 6007725 20/06/06
4.1.2 – Description of the data shown on the identification plate
Supplier code.
Code
Indicates the products code
which enables the type to be
Model
identified.
Nominal voltage for use.
ACV

Identification plate

The identification plate is affixed to the side of the electrical control unit. It gives the main
30-2005
specifications and confirms the conformity of the product to Low Voltage Directives
73/23/CE and CEM 89/336/CE.
40 A
Every time repairs must be carried out or spare parts ordered, it will be necessary
to always contact the manufacturer or retailer stating the serial number shown on
the identification plate.
C
F
Ser.n
Nominal current for use.
Nominal frequency for use.
Indicates the serial number needed for identifying the product. This number
must always be stated when requesting spare parts.
4 / 32
1
3
2