Safety / Accident Prevention; Warranty And Liability - Blitz BP 65 Manual De Servicio

4
Operating Instructions
King pin
Introduction
The king pin press represent the result of an
experience lasting for years. The high demand
for quality as well as the superior concept
guarantee reliability, high durability and eco-
nomic operation. To avoid needless damage or
danger, you should read carefully and observe
these operating instructions.
Application range of the king
pin press
King pin presses may only be used for press-
ing out king pins in the workshop.
Any other use above the described function
is not allowed.
The king pin press are designed and built
according to technical standard and the ap-
proved regulations for technical security.Yet,
danger for body and life of the operator may
turn up when using the pit lift inexpertly.

Warranty and Liability

Generally our "General Conditions of Sales
and supplies" are valid. These are available to
the user as of the time of contracting.
Warranty- and Liability- claims for personal
and property damage are excluded if
• use of the king pin press contrary to its
destined application,
• neglecting the remarks in the instructions
for use,
• Iinexpertly carried out repairs,
• spare parts not originating from BLITZ
• accessories of other manufacturers were
used or if
• unauthorised technical alternations of the
king pin press

Safety / Accident Prevention

• The press must only be operated by per-
sons who have read and understood this
manual and who have completed the 18th
year of life.
• Persons younger than 18 years are ex-
ceptionaly allowed to operate the press if
this is necessary for their education. Safe
working conditions have to be observed
by an experienced person and only tools
excluding injuries must be used.
• The instructions for use are constantly to
be kept at the place of operation, thus be-
ing at hand at any time.
• In addition to the instructions for use,
rules pertaining to other regulations i. e.
accident prevention and environmental
protection rules have to be observed.
• Prior to initial operation and later once a
year the press has to be checked uppon
technical faults by a skilled person. The
result has to be written down on the en-
closed sheet.
• The setup of the press must only be done
when press is not in working position.
• The user of the press has to wear safety
glasses during the operation.
• When using accessories not supplied by
BLITZ we will not take any responsibility.
• Doing repair works switch off main power
switch and cut compressed air supply (if
available).
• Using oils and greases environmental- and
safety- rules concerning these products
have to be observed.
Transport
• For transport of press only appropriate
transport means must be used.
• Weight of press vide technical data.
110425 03/13
110425 03/13