Alarm Setting - TFA 60.2533 Instrucciones De Uso

TFA_No. 60.2533_Anleitun_02_16
Radio-controlled alarm clock with thermometer
• Hold "▲" button for 3 seconds in normal mode (time/tempera-
ture display). "F" appears on the display. Hold "MODE" button
for 3 seconds. The hour digit is flashing. Press "▼" or "▲" but-
ton to adjust hours to your local time.
• Confirm with "MODE" button.

6.5 Alarm setting

• Select your desired alarm by "MODE" button:
• Alarm 1: AL1
• Alarm 2: AL2
• Set the alarm time in the desired alarm mode. Hold "MODE"
button for 3 seconds. The hour digits are flashing. Press "▼" or
"▲" button to adjust the time. Confirm with "MODE"
button. Set minutes in the same way. Confirm with "MODE"
button and the alarm is activated.
• To activate or deactivate the alarm function press "ALARM" but-
ton. , , +
LCD.
• Once the alarm starts to ring, you can stop the alarm by press-
ing "ALARM" button.
22
28.01.2016 14:55 Uhr
or no alarm symbol is shown on the
Seite 12
Radio-controlled alarm clock with thermometer
• You can activate the snooze function by pressing the
"SNOOZE/LIGHT" button on the top. Zz appears and the alarm
will be interrupted for 4 minutes.
6.6 Dual time setting
• Select dual time by "MODE" button.
• Hold "MODE" button for 3 seconds. The hour digits are flash-
ing. Press "▼" or "▲" button to adjust the time. Confirm with
"MODE" button. Set minutes in the same way. Confirm with
"MODE" button.
7. Backlight
• Press "SNOOZE/LIGHT" button. The backlight will light for
5 sec.
8. Care and maintenance
• Clean it with a soft damp cloth. Do not use solvents or scour-
ing agents.
• Remove the batteries if you do not use the product for a
lengthy period.
• Keep the instrument in a dry place.
23