Alarm Setting - TFA 60.5001 Instrucciones Para El Manejo

TFA No. 60.5001 Anleitung
Radio controlled projection clock

4.5 Alarm setting

• Press ALARM button at the backside.
• 0:00 and AL appear on the display.
• Hold ALARM button again.
• The alarm symbol appears and the hour digits are flashing.
• Press UP or DOWN button to adjust the hours.
• Confirm with ALARM button.
• Set minutes in the same way.
• Press MODE button to return to normal mode.
• Once the alarm starts to ring, you can stop the alarm by
pressing any button.
• You can activate the snooze function by pressing the
SNOOZE/LIGHT button on the top.
• SNZ appears and the alarm will be interrupted for 5 minutes.
• Press MODE button to deactivate the snooze function.
• SNZ disappears on the display.
• To activate or deactivate the alarm function press ALARM
button in alarm mode.
5. Projection and backlight
A. Battery operation: Press SNOOZE/LIGHT button. The back-
light and the projection will light for a few seconds (PRO-
JECTION switch On).
B. For permanent projection plug in the adapter (PROJEC-
TION switch On).
C. Without projection (PROJECTION switch Off).
6. Moon Phase Display
• The moon phase of each day is shown on the LCD
16
22.12.2009 11:40 Uhr
with thermometer
Seite 9
Radio controlled projection clock
7. Battery replacement
• Replace the batteries when the display becomes weak.
• Use alkaline batteries only. Observe correct polarity. Low
batteries should be changed soon to avoid the damage
resulting from a leaking battery. Batteries contain harmful
acids. Wear protective glasses and gloves when handling
with leaked batteries.
• Attention:
Please do not dispose of old electronic devices and empty bat-
teries in household waste. To protect the environment, take
them to your retail store or to appropriate collection sites
according to national or local regulations.
8. Maintenance
• Keep it in a dry place.
• Do not expose the instrument to extreme temperatures,
vibration or shock.
• Clean it with a soft damp cloth. Do not use solvents or
scouring agents.
• Avoid placing the instrument near interference sources/
metal frames such as computer or TV sets.
• Replace the batteries if the unit does not work properly.
9. Intended usage, exclusion of warranty,
safety information
• The product is not a toy. Keep it out of reach of children.
• The product is not to be used for medical purpose or for
public information, but is determined for home use only.
• The specifications of this product may change without prior
notice.
with thermometer
17