Technical Data; Warranty / Service - Beurer FT 78 Instrucciones De Uso

Error message Cause
Battery low; further
measurements are not
possible.
Depleted battery: if
the battery symbol is
shown constantly, no
more measurements
are possible.
If you cannot fi nd a solution to your problem here, contact our Cus-
tomer Services.

12. Technical data

Temperature range
Measurement accuracy
Operating temperature
range
Storage temperature range -25 – 55 °C (-13 – 131 °F), humidity
Memory
Display resolution
Battery
Weight
Solution
Replace the battery.
Replace the battery.
34.0 – 42.2 °C (93.2 – 108.0 °F)
In the measurement range of 35.0 to
42.2 °C (95.0 to 108.0 °F): +/-0.2 °C (0.4
°F), in other indicating ranges: +/-0.3 °C
(0.5 °F)
10 – 40 °C (50 – 104 °F), humidity ≤ 95%;
700 – 1060 hPa
≤ 95%; 700 – 1060 hPa
9 memory spaces
0.1
1 x 3V CR2032 battery
72 g including battery
Dimensions
Protective cap
Automatic switch-off
Battery operating life
Clinical reproducibility
IP classifi cation

13. Warranty / Service

Beurer GmbH, Söfl inger Straße 218, 89077 Ulm, Germany (hereinafter
referred to as "Beurer") provides a warranty for this product, subject to
the requirements below and to the extent described as follows.
The warranty conditions below shall not aff ect the seller's statu-
tory warranty obligations which ensue from the sales agreement
with the buyer.
The warranty shall apply without prejudice to any mandatory
statutory provisions on liability.
Beurer guarantees the perfect functionality and completeness of this
product.
The worldwide warranty period is 5 years, commencing from the
purchase of the new, unused product from the seller.
19
153 x 42 x 35 mm
6 pcs
60 seconds
3,000 measurements in succession or
one year with one to two measurements
per day, including standby mode.
0.08 °C (< 1 year old), 0.10 °C (1 – 5 years
old), 0.07 °C (> 5 years old)
IP 22, protection against harmful ingress
of water and dust