Cleaning And Maintenance; Troubleshooting; Specifications - Beurer WL 32 Manual De Instrucciones

4. Select a desired memory number by pressing the SET/MEM button. To save the radio station, press and
hold the SET/MEM button for two seconds.
Using Presets
1. Press the Sleep Function / Radio button to switch the radio on; "ON" will flash on the LCD Display for
about 10 seconds, then the set radio station will display.
2. To select a preset, press the SET/MEM button repeatedly until the desired preset station is reached.
Sleep function
This function shuts the radio off after a set time period.
1. Press the Sleep Function / Radio button twice; "SLEEP" will appear on the LCD Display and "05" will flash.
2. Press the Sleep Function / Radio button again repeatedly to select the number of minutes the radio will
play before shutting off. You can choose 5, 10, 15, 30, 45, 60, 75 or 90 minutes.
3. To confirm, wait about five seconds for the LCD Display to again show the time. To view the remaining
playback time, press the Sleep Function / Radio button.
NOTES:
• To cancel the Sleep function and shut the radio off immediately, push down on the dome.
• While the Sleep function is active, the mood light function is not available.
Using the AUX input
You can connect an external audio device, such as an MP3 player, to the wake-up light using the AUX input.
1. Insert one end of the AUX cable (included) into the AUX input on the rear of the wake-up light.
2. Insert the other end of the AUX cable into the headphone jack of your device.
NOTES:
• When listening via the AUX input, the volume level can be adjusted on the connected device only,
not on the wake-up light.
• When a cable is connected to the AUX input on the device, the mood light function is not available.

7. Cleaning and Maintenance

WARNING
• To help prevent electrical shock, keep water and other liquids away from this device. If water or other
liquid gets inside the case, dry it out completely before reuse.
• Protect the device from knocks, high humidity, dust, chemicals, extreme temperature fluctuations,
and nearby sources of heat (ovens, heaters).
• Clean the device with a dry cloth.
• Do not use abrasive cleaning products.

8. Troubleshooting

If the time does not display properly or the device does not function correctly, this may be caused by elec-
tromagnetic interference. For this reason, do not position the device near other electronic devices, such as
computers, routers, or modems. If the problem persists, reset the device to the factory settings by pressing
the reset button on the underside of the device using a pointed object. If this does not resolve the problem,
contact Customer Service.

9. Specifications

Sunrise Simulation
Snooze duration
Sleep function
Dimensions
Weight
OFF, 15, or 30 minutes before alarm
5 – 60 minutes
5, 10, 15, 30, 45, 60, 75, 90 minutes
4.8" x 4.7" (12.3 x 12 cm)
6.3 oz (180 g)
7