Beurer FT 100 Instrucciones De Uso página 43

• Insert the batteries or press and hold the LIGHT/
SET button for 4 seconds when the thermome-
ter is switched on. The time format flashes on the
display (Fig. 1).
• Use the MODE/MEM button to set your preferred
time format, and confirm with the LIGHT/SET but-
ton.
The year flashes on the display (Fig. 2).
• Use the MODE/MEM button to set the year, and
confirm with the LIGHT/SET button.
The day/month flashes on the display (Fig. 3).
• Use the MODE/MEM button to set the day and
month, and confirm with the LIGHT/SET button.
If the hour format is set as 12 h, the day/month
display sequence is reversed. Be sure to set the
date and time correctly. Otherwise, you will not
be able to save your measured values correctly
with a date and time and access them again later.
Fig. 1
Fig. 2
43
AM
YEAR
DATE
Fig. 3