Maintenance And Cleaning - Euroflex Wave Comfort Manual De Instrucciones

English
Die Depending on the requirements of the hazard analysis at the workplace, more extensive protective
measures may be required. The EUROFLEX
cuffs in ring mesh in lengths of 8, 15, 19 or 21 cm.
If other body parts must be protected against cuts or puncture wounds, it is necessary to wear
additional personal protective equipment.
Especially when working with electrically or pneumatically operated knives (EN14328:2005), the
glove must not be too big, otherwise there is a risk that the ring tissue may get caught by the
movable machine parts.
Adjusting the Gloves
All EUROFLEX
®
ring on the left hand. By changing, these can also be worn on the right hand (exception: arm protection
glove).
If needed, the wave bands can be lengthened by 20 mm:
1. Unscrew the press stud
2. Pull the band out 20 mm
3. Firmly screw the press stud on to the second speed nut on the end of the band
Reversing the EUROFLEX
1. Turn the glove inside out
2. Unscrew the press stud from the wave band
3. Turn the wave band in the band channel so that the clasp points outwards again. If necessary, the
band can be pulled out of the band channel.
4. If necessary, push the band back into the band channel
5. Then firmly screw the press stud on again
EUROFLEX
®
formance spring steel:
Especially when using the safety glove on mechanically driven knives, it must be ensured that
the band end is 15 mm or shorter. It must not stick out such that it can be pulled into moving
machine parts.
Never shorten the belt from the outside!
The protective cap on the end of the band is absolutely essential. The fixing srew is fitted with a
screw lock. This must be used exclusively for the one time only setting of the band length. After
being unscrewed and tightened several times, the firm seat of the screw can no longer be gua-
ranted and it must be replaced.

Maintenance and Cleaning

EUROFLEX
®
®
safety gloves are supplied as standard for right-handed use, i.e. for wea-
safety gloves:
®
safety gloves have a stainless steel band made from wave-shaped high-per-
safety gloves are made of a stainless steel ring fabric, whereby each ring is
11
safety gloves are, therefore, available with