Keyboard Description; Operations; Operative Options - Astralpool HELO HSX Manual De Uso

Operative Options

The heater can either work in the continuous running mode (A) or with the time setting program (B).
In the PCB there is a Jumper (J1) that can be selected as follows:
A. Continuous Running Mode
The plus and minus key in the time function are inhibited.
When the generator is on, the display shows temperature and if the time key is pressed the display shows the 4
central segments running rightward for a few seconds.
B. Time Programming Mode
When the time setting mode is switched on, the factory set time is 60 minutes but it can be changed from 5 to 240
minutes (with intervals of 5 min) by using the plus and minus keys.
The time can be changed also after the set steam bath program has started, by pressing the time key and
subsequently the plus and minus keys within 2 seconds.
The display alternatively visualizes for 30 seconds the temperature and for 30 seconds the remaining bathing time.
Setting the bathing temperature.
The default bathing temperature is 45
degree increments) by using the + and - keys.
The bathing temperature can be adjusted during bathing by pressing the temperature button and, within 2
seconds, the + or - buttons.

KEYBOARD DESCRIPTION

OPERATIONS

ON = the system works in the continuous running mode
OFF = it works with the time setting program
o
C. The temperature can be adjusted from 30 degrees to 50 degrees (in 1
4 digit LED display
on/off steam bath key with led
on/off lamp key with led
on/off fan key with led
on/off essence pump key with led
time key
temperature key
Plus key
Minus key
Memory1 key with led
Memory2 key with led
Memory3 key with led
Memory4 key with led
15