Publicidad
Idiomas disponibles
Idiomas disponibles
[074] Key Options
Default
Option
ON
1
[F]ire Key Enabled
I____I
ON
I____I
2
[A]uxiliary Key Enabled
ON
I____I
3
[P]anic Key Enabled
OFF I____I 4-8 For Future Use
[076] First Keypad Options
Default
Option
ON
I____I
1
Display Code when Programming
ON
I____I
2
Local Clock Display ON
OFF I____I
3
Local Clock Displays 24-hr Time
ON
4
Auto Alarm Memory Scroll Enabled
I____I
OFF I____I
5
Local Display of Temperature ON
ON
6
Bypass Options prompt ON
I____I
OFF I____I
7
For Future Use
OFF I____I
8
Auto-Scroll Open Zones ON
[077] Second Keypad Options
Default
Option
ON
1
Chime Enabled for Zone Openings
I____I
ON
2
Chime Enabled for Zone Closings
I____I
OFF I____I
3
5th Terminal is Keypad PGM Output
ON
4
Language Selection from Any Menu
I____I
OFF I____I
5
Power LED Enabled
ON
6
Power LED indicates AC present
I____I
ON
7
Alarms always Displayed When Armed Alarms not Displayed When Armed
I____I
OFF I____I
8
Low Temperature Warning Enabled
[080] PGM Terminal 1
Default: 01 I_______I _______I
PGM Output Number
[101]-[108] Partition Labels
(PK5500\RFK5500 Only)
ex. For Partition 1 enter section [101], for Partition 2 enter section [102] etc.
Section
Partition
I _ ____I _ _ ___I _ ____I _ ___ _I _ ____I _ ____ I _ ____I _ ____I _ _ ___I _ ____I _ ___ _I _ ____I _ ____I _ ____I
[101] to [108] 1 to 8
I _ ____I _ _ ___I _ ____I _ ___ _I _ ____I _ ____ I _ ____I _ ____I _ _ ___I _ ____I _ ___ _I _ ____I _ ____I _ ____I
NOTE: Partition 1 Label is also used as the System Label
ON
OFF
[F]ire Key Disabled
[A]uxiliary Key Disabled
[P]anic Key Disabled
ON
OFF
Display "Xs" when Programming
Local Clock Display OFF
Local Clock Displays AM/PM
Auto Alarm Memory Scroll Disabled
Local Display of Temperature OFF
Bypass Options prompt OFF
Auto-Scroll Open Zones OFF
ON
OFF
Chime Disabled for Zone Openings
Chime Disabled for Zone Closings
5th Terminal is Keypad Zone Input
Language Selection From Installer's
Power LED Disabled
Power LED indicates AC absent
Low Temperature Warning Disabled
Label
[120]-[151] Command Output Labels
Default: "Command_O/P_1" - "Command_O/P_4"
For Partition 1 Command O/P 1 to 4 enter [120] to [123]
For Partition 2 Command O/P 1 to 4 enter [124] to [127]
For Partition 3 Command O/P 1 to 4 enter [128] to [131]
For Partition 4 Command O/P 1 to 4 enter [132] to [135]
Cmd.
Section Part
Output
I _ ____ I _ ____I _ ____I _ __ __I _ ____I _ ___ _I _ ____I _ ____I _ ____I _ ____I _ __ __I _ ____I _ ____ I _ ____I
[120]-[151]1to8 1to4
I _ ____ I _ ____I _ ____I _ __ __I _ ____I _ ___ _I _ ____I _ ____I _ ____I _ ____I _ __ __I _ ____I _ ____ I _ ____I
[201]-[264] Door Chime Sound Programming
You can program the keypad to make up to four different door chime sounds for individual zones.
ex. For Zone 1 enter section [201], for Zone 2 enter section [202] etc.
Default
Option
ON
I____I
1
6 Beeps
OFF I____I
2
"Bing-Bing" Sound
OFF I____I
3
"Ding-Dong" Sound
OFF I____I
4
Alarm Tone
OFF I____I 5-8 For Future Use
[995][,] Reset Keypad Options to Factory Default
[996][,] Label Default (PK5500\RFK5500 Only)
[997] View Software Version (PK5500\RFK5500 Only)
[998][,] Initiate Global Label Broadcast (PK5500\RFK5500 Only)
[999][,] Reset Keypad EEPROM to Factory Defaults
Keypad Display Symbols
9
2
1
8
1
12
7
11
10
8
1 Fire – Indicates that there are fire alarms in memory.
2 Memory – Indicates that there are alarms in memory.
Ready Light (green) – If the Ready light is on, the system
3
is ready for arming.
Armed Light (red) – If the Armed light is on, the system
4
has been armed successfully.
5 System Trouble – Indicates that a system trouble is active.
6 AC – Indicates that AC is present at the main panel.
Program – Indicates that the system is in Installer's Pro-
7
gramming, or the keypad is busy.
(PK5500\RFK5500 Only)
For Partition 5 Command O/P 1 to 4 enter [136] to [139]
For Partition 6 Command O/P 1 to 4 enter [140] to [143]
For Partition 7 Command O/P 1 to 4 enter [144] to [147]
For Partition 8 Command O/P 1 to 4 enter [148] to [151]
Label
ON
Disabled
Disabled
Disabled
Disabled
Bypass – Indicates that there are zones automatically or
8
2
manually bypassed.
3
9 For Future Use
4
5
10 Arm Mode – Indicates the mode the panel is armed in.
6
Stay – Indicates that the panel is armed in the Stay
7
Mode. It will turn on at the beginning of the Exit
Delay
Away – Indicates that the panel is armed in the Away
Mode. It will turn on at the beginning of the Exit
Delay
Chime – This icon turns on when Door Chime is enabled on
11
the system and will turn off when Door Chime is disabled.
Open – When zones are opened, this icon will turn on, and
12
7 segment displays 1 and 2 will scroll through the open
zones.
OFF
Publicidad
