Mobile App And Wi-Fi Connection - cecotec Conga 3790 Manual De Instrucciones

ENGLISH
Current time
Fig. 17.
Hold down the time button for 3 seconds. The first 2 digits, indicating the hour, will start
blinking.
Use the up and down direction buttons to set the current time. Then, use the left and right
buttons to switch from hours to minutes and repeat the before step.
Fig. 18.
Press the time button to save the settings.
Fig. 19.
Cleaning scheduling
Fig. 20.
Long press the schedule button for 3 seconds. The first 2 digits, indicating the hour, will start
blinking.
Use the up and down direction buttons to set the schedule time. Then, use the left and right
buttons to switch from hours to minutes and repeat the before step.
Fig. 21.
Press the schedule button again to save the settings.
To cancel the scheduled cleaning, follow the below steps:
Set the clock on the remote control at 00:00 a.m. and save it.
Fig. 22.
Switch the robot off for 1 minute and switch it on again.
Note: The robot will beep to indicate all settings have been saved.
Note: When the remote control's batteries are replaced, the clock and schedule times must be
set again.
Light indicator:
Operating: Steady blue light.
Low power: Orange light blinks slowly.
Charging: Orange light oscillates.
Network configuration: Blue light blinks slowly.
Start-up/firmware update: Blue light oscillates.
Error: Red light flashes quickly.

6. MOBILE APP AND WI-FI CONNECTION

In order to access all the robot's functions from wherever you are, it is suggested to
download the Conga 3000 App. You will be able to control the robot in the most efficient way,
enjoying the excellence of cleaning.
33