Frame Fitting - Dometic SKYSCREEN POWERED Instrucciones De Montaje

Installation
Key to circuit diagrams:
Item
1
2
3
4
5
6
7
bk
rd
wh
gy
ye
7.2

Frame fitting

A
NOTICE! Risk of damage
• Use packing material where required (fig. 3, page 4). The side tracks must
be perpendicular to the head rail.
• Use screws and plugs suitable for the wall construction to fix the frame to
the recess. Pre-drill at the marked points.
• Ensure not to drill through the wall.
Proceed as shown (fig. 4, page 4):
➤ Align the blind with the window cut-out and mark where the holes are to be
drilled for the frame.
➤ Fix the frame with the screws to the ceiling.
I
NOTE
Check whether the moving rail is square and moves freely. If the moving rail is
not square it can be adjusted as shown (fig. 9, page 7 to fig. b, page 8).
➤ If necessary, you can remove a panel as shown (fig. 9, page 7 and fig. 0,
page 7 for installations without headlining or fig. a, page 8 for installations
with headlining).
16
Description
Fused 12 Vg or 24 Vg supply
(fuse rating: 2 A for 12 Vg, 1 A for 24 Vg)
Head rail motor 1
Head rail motor 2
Customer supplied switch (DPDT (double pole, double throw),
latching or momentary, 12/24 Vg, 3 A)
AP Receiver
Automation system dry contact component
IRS-300
black
red
white
gray
yellow
Skyscreen Powered
EN