Setting Up The Network - Siemens Gigaset WLAN Repeater 108 Manual De Instrucciones

Wireless connection of a PC
A wireless connection is made using a wireless network adapter that must be installed
in your PC.
A wireless network is defined by assigning
an identical SSID to all the devices. The
default SSID of the Gigaset WLAN Repeater
108 is ConnectionPoint.
ì
Therefore, set ConnectionPoint as SSID
on the wireless network adapter in your
PC, and deactivate encryption if necessary.
If the correct SSID has been entered in your PC's wireless network adapter, the wireless
link will be established automatically once you connect your Gigaset WLAN Repeater
108 to the mains power supply.
Please remember:
Before your PC can communicate with the Gigaset WLAN Repeater 108, you must run
network configuration on the PC (see page 17).
Connecting to the power supply
ì
Insert the round plug into the connection socket
marked DC on the Gigaset WLAN Repeater 108.
ì
Plug the mains adapter into a socket to which no
other devices are connected.
Please remember:
Never plug the mains adapter into a power socket if you
are not sure that it complies with the values on the
nameplate. The mains adapter and device could be
destroyed and you might be injured.

Setting up the network

Before your PC can work with the Gigaset WLAN Repeater 108, you must first set up the
network connections to the Gigaset WLAN Repeater 108.
Depending on the operating system, proceed as follows:
Windows XP
Note:
The name of the menu items may differ slightly from one version of Windows XP to
another. However, the configuration settings described below apply generally.
ì
Click on Start – Control panel.
ì
Click on the Network Connections.
Quick Start Guide
)))
17