Maxspect Gyre XF130 Manual Del Usuario página 15

Pulsing Mode
5. The Indicator Lights on the Control Dial will now start to blink.
6. Rotate the Control Dial to assign the pulsing speed. The Indicator Lights
will blink at the same duration as the assigned pulsing speed. There are
20 pulsing speed setting to assign, from 0.4s, 0.5s, 0.6s, 0.7s, 0.8s, 0.9s,
1s, 1.3s, 1.6s, 2s, 3s, 4s, 5s, 6s, 7s, 8s, 9s, 10s, 20s and 30s.
7. The following diagram illustrates the water flow pattern when the flow
rate is 80% and pulsing at 10 seconds.
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
10 20
Time (sec)
Operating Instructions
30 40
English
50
14