Cleaning And Maintenance; Disposal Of The Device (Environment); Technical Specifications - Topcom BABY SOOTHER 110 Manual De Usuario

Topcom Baby Soother Thermometer 110
5

CLEANING AND MAINTENANCE

The thermometer may be sterilized immersing the silicon rubber nipple ONLY in a sterilizing solution
such as alcohol. Immerse the nipple approximately 1 second in the solution. The protective clip-on
plastic supplied may be used as container for this purpose.
The Pacifier Thermometer should never be completely immersed in sterilizing solution or
sterilized in boiling water as damade will occur to the electronic components.
6

DISPOSAL OF THE DEVICE (ENVIRONMENT)

At the end of the product lifecycle, you should not throw this product into the normal
household garbage but bring the product to a collection point for the recycling of
electrical and electronic equipments. The symbol on the product, user guide and/or
box indicate this.
Some of the product materials can be re-used if you bring them to a recycling point.
By re-using some parts or raw materials from used products you make an important
contribution to the protection of the environment. Please contact your local authorities in case you
need more information on the collection points in your area.
7

TECHNICAL SPECIFICATIONS

Model number
Temperature range
Accuracy
Resolution
Working conditions
Battery
Battery lifetime
Power consumption
Sensor type
Display
Memories
Auto-shut-off
Dimensions
Weight
Classification
4
VT-901 W5
+32,0°C to +44°C
+/- 0,1°C (+35°C to +41°C)
+/- 0,2°C (rest)
0,1°C
Temp: 0 to +50°C - Hum: 10-83%
Temp: -20 to +60°C - Hum: 10-83%
1,55V DC (Alkaline) - SR41/LR41/UCC392/
UCC192 (non replaceable)
Approx. 100 hours continous use
Approx. 18 months while used 10min/day
0,15mW
Thermistor
Liquid Crystal Display 3-1/2 digits
5 last results
10 minutes after last temperature increase
55x50x50mm
+/- 12gr (Including batteries)
• Internally powered equipment
• Classification of type BF
• IP44
• Not suitable for use in presence of flamma-
ble anaesthetic mixture with air or with oxy-
gen or nitrous oxide
• Continuous operation with short-time load-
ing