Cleaning & Maintenance; Switching On/Off; Recommended Cleaning Intervals - Boneco 2055A Manual De Uso

Operating 2055A
B C
A
A) Rotary Dial
Connect the appliance to an outlet and turn rotary dial
A from position B (off) to position C or D as required. Posi­
tion D is especially quiet (night mode). Position C (normal
mode) achieves maximum humidity output. The disc rota­
tion speed remains constant with both mode selections.
The fan rotation speed increases with level II (C).
B) Switching on/off
If the rotary dial is in position B, the appliance is switched
off.
C) Normal mode
If you select position C, then normal mode is set, and the
appliance reaches maximum humidity output.
D) Night mode
If you turn the rotary dial to position D, the appliance works
in night mode and is especially quiet.
D E
E) Operating light and Automatic Shut-Off
«Tank empty»
The green light (LED) (E) illuminates when the appliance is
switched on. The water level is easy to see thanks to the
transparent water tank. The red LED light on the appliance
also shows when the unit should be refilled with water. If
the water level falls below the minimum level, the appliance
automatically switches off. The red symbol (E) appears on
the display. When water is added, the red LED changes to
green and the appliance continues operating.
Warning: When lifting the upper part off the housing, the
appliance also switches off. In this case, the red light E
will also appear on the display. Only when the upper part
is replaced on the base does the red LED (E) disappear and
the appliance resumes operation.
Cleaning/maintenance
Switch the appliance off and remove the power
plug from the outlet before you clean the appli­
ance (24).
• Regular cleaning is a pre­condition for hygienic,
trouble­free operation.
• The appliance can be unassembled for cleaning in a
few moves.
• Never submerge the entire unit in water (26).
• Empty and rinse the base once a week (27).
• The unit must be completely emptied and cleaned if
it has been filled with water for longer than a week
without being used.

Recommended cleaning intervals

The recommended cleaning intervals depend on the air and
water quality, as well as operating times. A thin film of lime
scale on the discs actually increases the humidity output!
• once to twice a year: upper part of housing and fan
• every 2 weeks: water tank and base
• every 4 weeks: humidifying discs
Cleaning the upper part of the housing
Remove the upper part of the unit (29) and wipe out tho­
roughly once to twice a year with a damp cleaning cloth
(30).
Cleaning the fan
The cover can be removed from the upper part of the unit
(31). Under this cover is the fan (32), which can be cleaned
with a damp cleaning cloth as required.
en
11