Fusion Apollo MS-RA770 Guia De Inicio Rapido página 7

In the image above, one Apollo RA770 stereo
and to two Apollo SRX400 zone stereos
A FUSION PartyBus zone stereo, such as the Apollo SRX400, controls the
volume in a single speaker zone . A FUSION PartyBus stereo, such as an
Apollo RA770 stereo, controls the volume on multiple speaker zones
a larger area with that stereo.
Streaming from a FUSION PartyBus Stereo on the Network
Before you can stream from a stereo on the FUSION PartyBus network, you
must set up and configure your FUSION PartyBus stereos according to the
installation instructions.
NOTE: You cannot stream the Apple AirPlay source to other stereos on the
network using the FUSION PartyBus feature. For more information, see your
Apple device manual.
1
Select the source icon.
The source icon is in the lower-left corner of the stereo screen, and shows the
source that is currently playing.
2
Select PARTYBUS
TIP: You can press and hold the source icon to show available FUSION
PartyBus devices.
Quick Start Manual
connects to a wireless router
.
to cover
The device shows a list of available FUSION PartyBus stereos on the
network.
3
Select the stereo you want to stream from.
The stereo begins streaming the same source as the connected FUSION
PartyBus stereo, and a green border appears around the device screen. All
media playback functions affect both devices.
Stopping Streaming from a FUSION PartyBus Device on the Network
You can leave the FUSION PartyBus network to play local sources on the stereo.
1
Select the source icon.
The source icon is in the lower-left corner of the stereo screen, and shows the
source that is currently playing.
2
Select PARTYBUS > LEAVE PARTYBUS.
TIP: You can press and hold the source icon to quickly leave the FUSION
PartyBus network.
DSP Settings
This stereo features digital signal processing (DSP). You can select pre-
configured DSP settings for FUSION speakers and amplifiers to optimize audio
reproduction in their installed locations.
All DSP settings are configured using the FUSION-Link remote control app
(page 7). See the owner's manual for more information.
More Information
FUSION-Link Remote Control App
You can use the FUSION-Link remote control app on your compatible Apple or
Android device to adjust the stereo volume, change the source, control playback,
select and manage radio presets, and adjust some stereo settings.You can use
the app to set up and configure DSP profiles on the stereo.You can use the app
to update the stereo software wirelessly
7